Centos如何查看网络接口速度是百兆还是千兆原创文章

玩技站长
玩技站长
管理员, Keymaster
11112
文章
0
粉丝
运维笔记评论105字数 591阅读1分58秒阅读模式

Centos如何查看网络接口速度是百兆还是千兆插图

在 CentOS 系统中,可以使用以下方法来查看网络接口的速度(即网络是百兆还是千兆):文章源自玩技e族-https://www.playezu.com/839447.html

方法一:使用 ethtool 命令

ethtool 是一个用于显示和修改网卡参数的命令行工具。你可以通过以下步骤来查看网络接口的速度:文章源自玩技e族-https://www.playezu.com/839447.html

  1. 安装 ethtool(如果尚未安装):
    sudo yum install ethtool
  2. 使用 ethtool 查看网卡信息:
    ip link show  网卡列表
    sudo ethtool 网卡名称

    例如,如果你的网卡名称是 eth0,命令会是:文章源自玩技e族-https://www.playezu.com/839447.html

    sudo ethtool eth0

    你会看到类似以下的输出:文章源自玩技e族-https://www.playezu.com/839447.html

    重点是 Speed 字段。它会显示当前网卡连接的速度,例如 100Mb/s 或 1000Mb/s。

  3. [root@localhost ~]# ethtool enp6s0
    Settings for enp6s0:
            Supported ports: [ TP AUI BNC MII FIBRE ]
            Supported link modes:   10baseT/Half 10baseT/Full 
                                    100baseT/Half 100baseT/Full 
                                    1000baseT/Full 
            Supported pause frame use: No
            Supports auto-negotiation: Yes
            Supported FEC modes: Not reported
            Advertised link modes:  10baseT/Half 10baseT/Full 
                                    100baseT/Half 100baseT/Full 
                                    1000baseT/Full 
            Advertised pause frame use: No
            Advertised auto-negotiation: Yes
            Advertised FEC modes: Not reported
            Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                                 100baseT/Half 100baseT/Full 
                                                 1000baseT/Full 
            Link partner advertised pause frame use: Symmetric
            Link partner advertised auto-negotiation: Yes
            Link partner advertised FEC modes: Not reported
            Speed: 1000Mb/s
            Duplex: Full
            Port: MII
            PHYAD: 0
            Transceiver: internal
            Auto-negotiation: on
            Supports Wake-on: pumbg
            Wake-on: d
            Current message level: 0x00000033 (51)
                                   drv probe ifdown ifup
            Link detected: yes

其中 Speed: 1000Mb/s 就是这个网卡的带宽。但是,您可以看到上述命令的输出有点太长了。因此,如果您希望将此输出限制为仅 NIC 速度,则必须按如下所示的方式对其进行修改:文章源自玩技e族-https://www.playezu.com/839447.html

[root@localhost ~]# ethtool enp6s0 | grep -i speed
        Speed: 1000Mb/s
[root@localhost ~]#

方法二:使用 dmesg 命令

你也可以使用 dmesg 命令查看系统日志,以获取网卡速度的信息:文章源自玩技e族-https://www.playezu.com/839447.html

dmesg | grep -i 'eth0'

(将 eth0 替换为你的实际网卡名称)文章源自玩技e族-https://www.playezu.com/839447.html

在输出中寻找类似的条目:文章源自玩技e族-https://www.playezu.com/839447.html

[ 2.832184] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

这条信息也会告诉你网卡的连接速度。文章源自玩技e族-https://www.playezu.com/839447.html

方法三:查看系统日志文件

系统日志文件中也可能包含网卡速度的信息。你可以查看 /var/log/messages 或 /var/log/syslog 文件:文章源自玩技e族-https://www.playezu.com/839447.html

grep -i 'eth0' /var/log/messages

或者

grep -i 'eth0' /var/log/syslog

这些命令会显示所有与网卡 eth0 相关的日志信息,其中可能包含速度信息。

通过以上方法,你可以很方便地在 CentOS 系统中查看网卡的连接速度。

原创声明:本文章为原创内容,所有文章均由博主亲自撰写,严格遵循原创原则。我们承诺不使用任何人工智能生成的内容,所发布的每一篇文章都经过深思熟虑,旨在为读者提供真实、有价值的观点和信息。我们坚信原创才是知识分享的根本,致力于为广大读者呈现最具真实性和独特性的文章。感谢您的支持与关注,欢迎持续关注我们的原创内容。

 
匿名

发表评论

匿名网友
确定

拖动滑块以完成验证